Part1.TechnicalParametersInstructions
1.Cash Drawer Parameters
Bill slot: ABS material, 4/5/6 bill slots (adjustable), with money clip.
Coin slot: 5 coin or 8 coin slots (adjustable).
Check slot: 1 check slot to store check (16mm height).
Lock : 3 position lock, can be opened by hands or electric driver and support lock function.
Net weight: 5.7kgs; Gross weight: 6 kgs.
Size: 405(W)*420(L)*100(H)mm.
Color: white & black.
2.Electric Index
Rated pulse width: 100~200ms. Driver voltage: DC12V/1A.
3.Working Environment Temperature: -10~40ºC. Relative humidity: 40~95%.
Part 2. Associated Equipment
-1 cash drawer. -1 driver connecting wire. -2 keys.
Part 3. Usage of Cash Box
1. Instructions of Coin Slots
You can adjust the number and size of slots according to your needs.
When adjusting, you need to remove and fix the money clip and shim. You need to pull the pins of money clip out of the sticking positions from both sides when unloading money clip and then take out the money clip. You need to do the same when taking out shim.
The check aperture on the front panel of cash box is used to store some receipts like check temporarily. When these receipts are inser- ted into the aperture, they will fall down on the bottom of cash box. You can get these receipts by just taking out the coin slot when you are doing shift of duty.
2.How to Open the Cash Drawer 1)Opened by key: insert supplementary keys into the lock holes, and then rotate to the manually opening position. 2)Opened by electrical driver: insert the supplementary keys into the lock holes, rotate to the electrical driver opening position, pull out the keys and then connect the interface of driver lines to the driver devices(such as receipt printer, customer display, driving card and so on). 3.Cash Drawer Driver
The inside of cash box is made up of electromagnetic valve and transmission equipment, so there are two ways to open the cash drawer--electrical or manual open. Manual open way is by using keys to open cash box directly. Electric open way is by sending an electric signal to the solenoid valve. Generally, there are 12V and 24V cons- tant signals, used according to the equipped V amount. There are many ways to open the cash box by electrical driver, such as receipt printer, customer displays, cash box card and so on.
4.Test of Cash Drawer
Put the cash drawer on a flat place and to check if it stands steadily;
and then to check the cash drawer can flick out normally after you connect the driver line to the driver devices.
Part 4. Safety, maintenance and recycling instructions
1.Caution: Never open the device, the internal parts are danger, elec- trical shock. 2.Do not install this unit near water, for example, in a wet basement, in an unprotected outdoor installation or in any area classified as a wet. 3.Do not insert objects of any kind into this unit through openings as they may touch voltage points and short out parts that could result in fire or electric shock. Do not spill any liquid on the unit. 4.Always use cables approved by the manufacturer. 5.Never throw the product to a heat source or fire. 6.Keep the product at room temperature, maximum 30 7.Clean the product with a soft and dry cloth. 8.Follow local regulations for disposing of the product.